The Value of Test Swatches in Refinishing

If you’re a knitter and you’ve been knitting from patterns for any length of time, you will have run across the advice to knit a test swatch using the yarn and needles intended for your particular project. I cringe at the thought of making test swatches because they feel like a waste of time. Let me get to work on the actual thing I want to make, please!

Usually I bypass the swatch and jump right into the project. When I’m finished, I am often annoyed to find that my piece is not the size I hoped it would be. Usually, it is too big. That’s the value of a test swatch in knitting. If I would do them, I would know whether I needed to adjust my needles in order to get the proper gauge.

Now that Erik has been seriously refinishing furniture for the past 5+ years, he has come around to learning the value of test swatches in refinishing.

As I’ve watched his process evolve, I’m amazed at how many variables there are to consider in refinishing a piece of mid-century modern furniture. Here are some of the variables he has to contend with:

  • Type of wood – Some woods, like walnut, take stain evenly; others, like birch, don’t and will turn out blotchy if not dealt with properly.
  • The stain – Color is a big part of this, but so are the composition (gel vs. dye vs. pigmented vs. wiping & etc.) and brand of stain.
  • How finely a piece is sanded – If coarse-grit sandpaper is used before staining, more pigment will lodge into the wood and the stain will appear darker.
  • The various protective coats – There are usually several layers of protective coats on a given piece. These can include shellac, de-waxed shellac, lacquer, polyurethane (known as “Poly” in the business), vinyl sealer, conversion varnish, and curing oils. The lacquer can be nitrocellulose, pre-catalyzed lacquer, post-catalyzed lacquer, or water-based.
  • The condition a piece is in – If an old piece of furniture has been impregnated with a silicone furniture polish over time, this will contaminate a new finish if it is not properly sealed in. If it has been water-damaged, this damage has to be treated so that a shadow of it doesn’t reappear after the piece has been refinished. If a piece has faded due to sun damage, this will also affect the final outcome.

As you can see, refinishing a piece of furniture is not a simple matter of slapping on a new finish coat.

Erik Warner's refinishing test swatches, May 2017.
Erik Warner’s refinishing test swatches, May 2017.

Because of all these variables (and more!) and the time it takes Erik to strip and sand a piece to bare wood, he has become a fan of test swatches. This is especially true when he’s trying a new finishing technique. He doesn’t want to get to the end of a project and find he doesn’t like the result. That would mean restripping the entire piece over again.

To create a test swatch, he finds a scrap piece of wood that is the same or similar to the furniture he is working on and tries a few finishing techniques on it, marking each trial with the variables so he can remember how to recreate the finish he prefers on the furniture.

Notes on Erik Warner's test swatches, May 2017.
Notes on Erik Warner’s test swatches, May 2017.

The final result from the middle test swatches in the above photos is the finish on these matching lounge chairs:

Lounge chairs refinished by Erik Warner, May 2017.
Lounge chairs refinished by Erik Warner, May 2017.

Nice, eh?

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s